Contents
  1. The Czech Republic country calling code
  2. Current code versus the former Czechoslovak code
  3. How to dial a Czech number from abroad
  4. Details to confirm before you dial

The Czech Republic country calling code

The international telephone calling code for the Czech Republic is +420. This code identifies the country as a whole within the international numbering system. It is not an area code for a city or region, and it is the same code whether the number you are calling belongs to a landline or a mobile phone in the country.

The plus sign stands for the international access prefix of the country you are calling from. When you see a Czech number written as +420 followed by further digits, the plus is replaced by your local access prefix when dialing, or it can be entered directly on most mobile phones.

Current code versus the former Czechoslovak code

+420 is the current assignment for the Czech Republic. Older references may show code 42, which belonged to the former Czechoslovakia. That shared code is historical and should not be used for calls today. If you find a number in an old directory or document listed under 42, it needs to be checked and converted before use.

How to dial a Czech number from abroad

An international call to the Czech Republic follows three parts in this order: the international access prefix used in your country, the Czech country code, and the subscriber number.

[international access prefix] 420 [subscriber number]

On a mobile phone you can usually replace the access prefix with the plus sign:

+420 [subscriber number]
  • International access prefix: depends on the country you are calling from, not on the Czech Republic. Many countries use 00, while countries in the North American Numbering Plan use 011. Your origin was not specified, so check the prefix used by your own country or carrier.
  • Country code: always 420 for the Czech Republic.
  • Subscriber number: the full Czech number as given to you, without the country code repeated.

Details to confirm before you dial

The supplied source confirms the +420 country code but does not cover Czech domestic numbering rules, such as the expected length of a subscriber number or whether a domestic trunk prefix exists. As a general international rule, if a number is written in a domestic format that begins with a trunk digit used only for calls within the country, that digit is dropped after the country code. Whether this applies to a particular Czech number has not been verified here, so compare the number you have with the format shown by the person or organization you are calling.

If your call does not connect, check three things in order: that you used the correct access prefix for your location, that 420 was entered only once, and that no extra domestic digits were left in front of the subscriber number.