Contents
  1. The calling code for the US Virgin Islands
  2. How to dial a US Virgin Islands number
  3. From a mobile phone, anywhere
  4. From another North American Numbering Plan location
  5. From a country outside the North American Numbering Plan
  6. Within the US Virgin Islands
  7. Trunk prefix and formatting notes
  8. What this guide does not cover

The calling code for the US Virgin Islands

The US Virgin Islands use country calling code +1 together with area code 340. Telephone numbers there are written internationally as +1 340 followed by a seven-digit local number.

The +1 code is not unique to the territory. It is shared by every member of the North American Numbering Plan (NANP), which includes the United States, Canada and a number of Caribbean jurisdictions. Within that shared plan, area code 340 identifies the US Virgin Islands. Dialing +1 alone is therefore never enough to reach the territory; the 340 area code is always required.

Item | Value
Country calling code | +1 (shared across the North American Numbering Plan)
Area code | 340
Local subscriber number | 7 digits
Full international format | +1 340 XXX XXXX

This reflects the assignment listed in a public country calling code table retrieved in November 2026. Numbering assignments can change, so older directories or printed materials may not match the current format.

How to dial a US Virgin Islands number

The exact sequence depends on where you are calling from, and no origin was specified. The patterns below cover the main cases. In each one, [local number] stands for the seven-digit subscriber number you want to reach.

From a mobile phone, anywhere

Most mobile phones accept the plus sign in place of an international access code. Entering the number in full international format works regardless of which country you are in.

+1 340 [local number]

From another North American Numbering Plan location

Because the United States, Canada and other NANP members share code +1 with the US Virgin Islands, calls between them do not use an international access code. You dial 1, then the area code, then the local number, in the same way as a long-distance call within the plan.

1 340 [local number]

From a country outside the North American Numbering Plan

On a landline, or on a mobile that does not use the plus sign, start with the international access code used in your country, then the country code, area code and local number. The access code varies by country and is not covered by the source used for this guide, so confirm it with your phone provider.

[your international access code] 1 340 [local number]

Within the US Virgin Islands

Whether a call made inside the territory needs the full ten digits (340 plus the local number) or only the seven-digit local number depends on current local dialing rules, which the supplied source does not confirm. Dialing the full ten-digit number is the more complete form; check with the local carrier if a shorter form is rejected.

Trunk prefix and formatting notes

  • There is no leading zero to drop. Some countries write domestic numbers with a trunk prefix of 0 that must be removed when calling from abroad; NANP numbers, including those in the US Virgin Islands, do not use that convention.
  • The digit 1 serves as the country code in international format and as the long-distance prefix when dialing between NANP locations. Do not dial it twice.
  • In writing, a complete number is often shown as +1 340 XXX XXXX internationally, or as (340) XXX-XXXX in North American domestic style. Spaces, hyphens and parentheses are formatting only and are not dialed.

What this guide does not cover

Call charges are not addressed here. Pricing for calls to area code 340 depends on your carrier and plan, and the supplied source contains no rate information. Country-specific international access codes and current in-territory dialing requirements are also outside the source and should be confirmed with a phone provider.